Moving And Storage; Technical Data - Tunturi T90 Manual Del Usuario

MOTOR OVERLOAD - Ensure correct usage of the
treadmill. Do not brake the belt. Turn the power switch
off, wait 1 minute and turn the power switch on again.
If treadmill recovers to normal operation, you may
continue to use the treadmill. Ensure the lubrication
is sufficient, re-lubricate the running deck if needed.
Otherwise, call the dealer for service.
LIFT MOTOR ERROR - Call the dealer for service.
LIFT MOTOR OVERLOAD - Ensure correct usage
of the treadmill. Do not overload the lift motor by
continuously changing the elevation. Turn the power
switch off, wait 1 minute and turn the power switch on
again. The lift motor will be automatically calibrated
when the power switch is turned on. If treadmill
recovers to normal operation, you may continue to use
the treadmill. Otherwise, call the dealer for service.
MAINTENANCE CODE
CHECK LUBRICATION. Ensure the lubrication is
sufficient, re-lubricate the running deck only if needed.
Remove the code by pressing the ENTER key twice.

MOVING AND STORAGE

Move the T90 treadmill according to the following
instructions: turn off the power switch and unplug
the power cord from the wall and the treadmill. Stand
behind the treadmill and take hold of the aluminium
profile at the rear end of the treadmill. Tilt the rear end
of the equipment so that it rests on the transportation
wheels, and move the equipment by wheeling. Lower
the treadmill carefully onto the floor.
NOTE! Transport the treadmill with extreme caution
over uneven surfaces, for example over a step. The
treadmill should never be transported upstairs using
the wheels over the steps, instead it must be carried.
We recommend that you use a protective base when
transporting the equipment. The running belt needs to
be realigned and centered after moving.
To prevent malfunctioning of the treadmill, store it in a
dry place with as little temperature variation as possible,
protected against dust. Always unplug the treadmill
from the electrical outlet when not in use.

TECHNICAL DATA

Length ........................... 210 cm / 83"
Height ........................... 142 cm / 56"
Width ........................... 91 cm / 36"
Weight ........................... 114 kg / 251 lbs
Running surface ............ 51 x 148 cm / 20" x 58"
Speed ............................ 0,5-24,0 km/h / 0,3-15 mph
Elevation range .............. 0-10 %
Motor ............................ 3,5 HP
T90 treadmill meets the requirements of the EU's EMC
Directives on electromagnetic compatibility (89/336/
EEC) and electrical equipment designed for use within
certain voltage limits (73/23/EEC). This product
therefore carries the CE label. T90 treadmill meets EN
precision and safety standards (Class SA, EN-957, parts
1 and 6).
12
Due to our continuous policy of product development,
Tunturi reserves the right to change specifications
without notice.
CAUTION! The instructions must be followed carefully
in the assembly, use and maintenance of your
equipment. The warranty does not cover damage due to
negligence of the assembly, adjustment and maintenance
instructions described herein. Changes or modifications
not expressly approved by Tunturi Oy Ltd will void the
user's authority to operate the equipment!
We wish you many enjoyable trainings with your
new Tunturi training partner!