Attaching The Light Bulbs And Glass Shade - Kichler 52 BASICS PRO SELECT Manual De Instrucciones

ATTACHING THE LIGHT BULBS
AND GLASS SHADE
Step 1. Remove the glass cap and decorative nut from the light kit (Fig. 17).
Step 2. Install LED bulbs (included) (Fig. 17).
Step 3. Place glass shade over the light kit stem, secure with glass cap and
decorative nut (Fig. 17).
Step 4. Insert the pull chains through the eyelet in the shade and cap. Secure
the glass cap with decorative nut provided. Do not overtighten (Fig. 17).
Step 5. Restore power and your light kit is ready for operation.
NOTE: Make sure to leave enough space between the fan pull chain and the
bulbs so the chain doesn't rub against any of the bulbs.
LED bulb
3 Pcs
Glass shade
Pull chain
Decorative nut
Fig. 17
52" BASICS PRO SELECT | 15
Pull chain
Glass cap
Pull chain