Installing The Light Kit And Acrylic Shade; Assembly - Kichler Parlour LED 300320 Manual De Instrucciones

INSTALLING THE LIGHT KIT AND ACRYLIC
SHADE ASSEMBLY
NOTE: Before continuing installation, confirm that the power is still turned off NOTE: Before continuing installation, confirm that the power is still turned off
at the main circuit breaker or by removing the circuit fuse. Turning the power at the main circuit breaker or by removing the circuit fuse. Turning the power
off using a wall switch is not sufficient to prevent electrical stock. off using a wall switch is not sufficient to prevent electrical stock.
Step 1. Remove three screws on the light plate assembly and keep for later Step 1. Remove three screws on the light plate assembly and keep for later
use. (Fig. 20) use. (Fig. 20)
Step 2. Hold the light kit close to the light plate assembly and connect the Step 2. Hold the light kit close to the light plate assembly and connect the
WHITE wires from the light kit and fan by pushing the connectors together. WHITE wires from the light kit and fan by pushing the connectors together.
Follow the same procedure with the BLACK wires. (Fig. 21) Follow the same procedure with the BLACK wires. (Fig. 21)
Step 3. Tuck the connections neatly into the light kit. Attach the light kit to the Step 3. Tuck the connections neatly into the light kit. Attach the light kit to the
light plate assembly and securely tighten with three screws removed on Step light plate assembly and securely tighten with three screws removed on Step
1. (Fig. 21) 1. (Fig. 21)
14 | KICHLER.COM
Screw
Fig. 20
Light Plate Assembly
Light Kit
Screw
Fig. 21
Switch Housing