Janome QS2250 Manual De Instrucciones página 51

.
⁄ 0 ⁄ 1
⁄ 2
y
⁄ 3
.
* The front bartack and left row first, then the back
⁄0
⁄1
⁄2
u
⁄3
48
Sew slowly and stop the machine at the starting
point when a buttonhole is completed.
bartack and right row.
Cut both needle and bobbin threads leaving about
10 cm (4˝) thread ends.
Draw the needle thread to wrong side of fabric by
pulling the bobbin thread.
Then, knot the threads.
Insert a pin inside the bartack.
Then cut the opening with seam ripper.
Take care not to cut the stitches.
To make the next buttonhole.
To continue the same size of buttonhole stitching,
return the pattern selector dial to
u
again, as shown.
Now, simply step on the foot control sew an
identical buttonhole.
When buttonhole sewing is finished, push the
buttonhole lever upward as far as it will go.
y
, then back to