Corded Buttonhole; Boutonnière Gansée - Janome QS2250 Manual De Instrucciones

q w
r

Corded Buttonhole

e
q
Stitch selector:
w
Presser foot:
e
Thread tension:
r
Stitch length:
t
t
Stitch width:
5
* Set the stitch width in accordance with the thickness
of the cord used.
* To cut the opening and to reset for sewing the next
buttonhole, refer to the instructions on pages 46 and
48 .
1. With the buttonhole foot raised, hook the cord on
the cord spur at the back of the buttonhole foot.
q
Spur
2. Bring the ends toward you under the buttonhole foot
until they clear the front end.
3. Hook the filler cord into the forks on the front of foot
R to hold them tight.
4. Lower the needle into the garment where the
buttonhole will start and lower the foot.
5. Depress the foot control gently and sew the
buttonhole.
Each side of the buttonhole and the bartacks will be
sewn over the cord.
6. Remove the fabric from the machine and cut the
sewing threads.
7. Pull the left end of the filler cord to tighten it.
8. Thread the end through a darning needle, draw to
the other side of the fabric and cut.
50
R:Automatic buttonhole foot
1 – 5
0.5 – 1
5