Installation Area; Ambient Working Conditions - Corghi Artiglio 500 Manual De Uso

INSTALLATION AREA

WARNING
The installation site must be chosen in strict compliance with the relevant regulations
regarding safety in the workplace.
IIMPORTANT: for correct, safe use of the equipment, users must ensure a lighting level
of at least 300 lux in the place of use.
ATTENTION
If the machine is installed outdoors, it must be protected by a roof.
Place the tyre changer in the chosen work position, complying with the minimum clear-
ances shown in fig 3.
The machine must be placed on a horizontal surface, preferably concrete or tiled. Do not
install on unstable or damaged surfaces.
The surface on which the machine rests must withstand the loads transmitted during
operation. The surface must have a load-carrying capacity of at least 400 kg/m2.

Ambient working conditions

- Relative humidity 30% - 95% without condensation.
- Temperature 0°C ÷ 50°C.
WARNING
Use of the machine in a potentially explosive atmosphere is not permitted.
EN
Operator's manual Artiglio 500 49