System Description - Cebora 217-01 Manual De Istrucciones

CEBORA S.p.A.
2

SYSTEM DESCRIPTION.

The Cebora SOUND TIG ROBOT Welding System is a multi-process system for Tig welding, developed
for use in combination with a Welding Robot arm on automated welding systems.
It comprises a Power Source, with integrated Control Panel, a Cooling Unit, a Wire Feeder Unit and a
Robot Interface (see fig. 2).
GB
2 Power Source – Wire feeder extension
3 Power Source – Robot Interface signal cable connection (art. 1200, l = 5m).
4 Power Source – Robot Interface CANopen cable (1.5 m long, included in the Robot Interface).
5 Robot Control cabinet.
6 Welding wire 15 Kg spool holder (art. 121) (option Marathon Pack).
7 Tig torch.
8 Wire Feeder Unit (WF4-R3, art. 1661).
10 Welding wire sheath (art. 1935.00, l = 1,6 m; art. 1935.01, for Marathon Pack).
21 Power Source (Tig AC-DC 2643/T, art. 351-60; Tig AC-DC 3340/T, art. 352-60;
Tig AC-DC 4560/T, art. 353-60).
22 Cooling Unit (GRV10 or GR52).
24 Control Panel (integrated in the Power Source).
25 Robot Interface (RAI 217, art. 217-01).
26 Custom multiwire wiring.
This Instruction Manual refers to the Robot Analog Interface RAI217, art. 217-01, and have been
prepared in order to instruct the staff assigned to the installation, the operation and the maintenance of the
welder. It must be conserved with care, in a famous place to the several one interested, it will have to be
consulted every time are doubts and will have to follow all the operating life of the machine and
employee for the replacement parts request.
NOTE: The Robot Interface RAI217 is only supported from Power Sources with firmware versions "05"
for art. 351, "07" for art. 352 and "03" for art. 353, onwards.
In case of older version update is required.
3.300.129-C
fig. 2
(art. 1168.00, l = 5m; art. 1168.20, l = 10m).
22
26/01/2011