Positioning Of The Sensor For Installation; Positioning Of The Sensor In Motors Of Lines W21, W22 And W50 - WEG Motor Scan Manual General De Instalación Y Operación

www.weg.net

7.5. POSITIONING OF THE SENSOR FOR INSTALLATION

7.5.1. Positioning of the sensor in motors of lines W21, W22 and W50

As shown in Figure 7.3, the sensor should be installed at a maximum distance D = 20 mm from the center of
the motor and at a distance M from the top of the fin. The distance M varies according to the motor line and
frame, and it is indicated in Table 7.1.
4 3 2
Figure 7.3 – Distances D and M to mount the sensor
In figure 7.4, see the fixation of the sensor on a motor. of W22 line.
7 6 5 4
C
B
DETALHE C
ESCALA 1 : 5
DETALHE B
ESCALA 1 : 5
Figure 7.4 – Sensor mounted on the motor W22
Manual of Electric Motors 55