Tyre Pressure - Sabo 92-13 HF Manual Del Operador

18
EN

5.3.2 Tyre pressure

Having the right tyre pressure is the main condi-
tion for ensuring that the cutting deck is horizon-
tal and mows evenly.
Unscrew the valve caps and connect a com-
pressed air line with a gauge to the valves.
The pressures are:
FRONT
REAR
5.3.3 Filling with oil and fuel
NOTE
what type of oil and fuel you can use.
With the engine off, check the oil level. According
to the instructions in the engine manual, this must
be between the MIN and MAX marks on the dip-
stick.
Refuel using a funnel, but do not completely fill the
tank.
The tank's capacity is about 6 liters.
DANGER!
should be carried out in an open or
well-ventilated area with the
engine off. Always remember that
petrol fumes are inflammable. DO
NOT USE A NAKED FLAME TO
LOOK INSIDE THE TANK AND DO
NOT SMOKE WHEN REFUELLING.
IMPORTANT
the event of accidental spills or leaks, rinse immediately with water. The warranty does not
cover for damage to plastic parts of the bodywork or the engine caused by petrol.
1.0 bar
1.2 bar
The engine manual indicates
Refuelling
Do not drip petrol onto the plastic parts to avoid damaging them. In
HOW TO USE THE MACHINE
MAX
MIN