Replacing The Bulbs; Replacing A Fuse - Sabo 92-13 HF Manual Del Operador

MAINTENANCE

6.3.4 Replacing the bulbs

The bulbs (18W) have a bayonet fitting and are installed in the bulb holder which can
be taken out by turning it anti-clockwise with pliers.

6.3.5 Replacing a fuse

The machine is fitted with fuses (1) with different capaci-
ties and functions. Specifically:
– 10 A fuse = protects the main and power circuits of
the electronic circuit board. When it blows, the
machine stops and the dashboard light switches off.
– 25 A fuse = protects the battery charger circuit. When
it blows, the battery gradually runs out and
the machine will have problems starting.
The fuse capacity is indicated on the fuse.
IMPORTANT
always be replaced by one of the same type
and ampere rating, and never with one of
another rating.
If problems persist, contact Your Dealer.
6.3.6 Dismantling, replacing and remounting the blades
WARNING!
A blown fuse must
Always wear work gloves when handling the blades.
33
EN