Why The Safety Devices Cut In; Seat Adjustment - Sabo 92-13 HF Manual Del Operador

HOW TO USE THE MACHINE

5.2 WHY THE SAFETY DEVICES CUT IN

The safety devices work in two ways:
– hey prevent the engine from starting if all the safety requirements have not been
met;
– they stop the engine if even just one of the safety requirements is lacking.
a) To start the engine, it is necessary that:
– the transmission is in "neutral";
– the blades are not engaged;
– the operator is seated or the parking brake is engaged.
b) The engine stops when:
– the operator leaves his seat when the blades are engaged;
– the operator leaves his seat when the transmission is not in "neutral";
– the operator leaves his seat with the transmission in "neutral" but without applying
the parking brake;
– the grass-catcher is lifted or the stone-guard is removed when the blades are
engaged;
– the parking brake is engaged without disengaging the blades.
– the speed change (
brake on.
5.3 DIRECTIONS BEFORE STARTING WORK
Before starting to mow, it is necessary to carry out several checks and operations to
ensure you can work efficiently and in maximum safety.

5.3.1 Seat adjustment

To change the seat position, loosen the four
fixing bolts (1) and slide it along the slots.
Once you have found the right position,
tighten the four screws (1).
4.22) the drive pedal is activated ( 4.32) with the parking
1 1
17
EN