Kichler 35157 Manual De Uso página 10

ASSEMBLY INSTRUCTIONS
10. Loosen the two shoulder screws without fully
removing the hanging bracket (A). Assemble canopy
(C) by rotating keyhole slot in canopy over shoulder
screws in hanging bracket (A). Tighten shoulder
screws. Securely attach and tighten the canopy hole
cover (I) over the shoulder screws in the hanging
bracket (A) utilizing the keyhole slot twist-lock
feature.
11. Raise blade (D) to the flywheel located on the motor
assembly (F). Align the center hole on the blade (D)
with the hole on the flywheel marked with a red dot.
Fit the two protrusions on the blade (D) into the
holes on the flywheel. Insert the blade screws into
the two screw holes on the inner side of the flywheel.
Tighten all screws.
Repeat for remaining blades.
12. Attach blade plate (K) to blades (D) with blade plate
screws using phillips screwdriver (not included).
10
C
11
Blade Screw
12
D
K
Blade
Plate
Screw
10
A
Shoulder
Screw
I
Blade
Protrusion
F
D
Red Dot
Screwdriver