Kichler 35157 Manual De Uso página 11

ASSEMBLY INSTRUCTIONS
13.Remove the mounting screw
marked with a red dot label from the
motor assembly (F) and loosen but
do not remove the other 2. Feed
the wires from the motor assembly
(F) through the center hole in the
LED housing (G). Position keyhole
slots around the screws and twist
clockwise. Insert the screw that you
had previously removed. Tighten all
screws.
14.Connect wires from the motor assembly
(F) to the LED kit (H). Remove screws
from the LED housing (G). Assemble the
LED kit (H) to LED housing (G) using the
3 previously removed screws. Tighten all
screws.
13
F
G
14
Preassembled
Mounting Screw
11
Preassembled
Mounting Screw
F
G
H