List Of Available Models; Identification Labels - WEG CFW700 Serie Manual Del Usuario

General Instructions

2.4 LIST OF AVAILABLE MODELS

The available inverter models are listed in table B.1 and B.2.

2.5 IDENTIFICATION LABELS

There are two nameplates on the CFW700: one complete nameplate is affixed to the side of the
inverter and a simplified one is located under the keypad. Please refer to figure A.2 to verify the
position of these labels on the product. The nameplate under the keypad allows the identification
of the most important characteristics of the inverter even if they are mounted side-by-side. When
there is more than one inverter it is necessary to be careful not to exchange the inverter covers
(front cover in case of inverters sizes A, B or C and control rack cover for inverters sizes D and
E) because there are individual information labels under the keypad of each inverter.
WEG part number
Serial number
(a) Nameplate located under the keypad
CFW700 model
WEG part number
Manufacturing date
Inverter net weight
Input rated data (voltage,
number of phases, rated
currents for operation with
ND and HD overload cycles,
and frequency)
Current specifications
for operation with normal
overload cycle (ND)
Current specifications
for operation with heavy
overload cycle (HD)
(b) Nameplate affixed to the side of the inverter
12 | CFW700
Figure 2.2 (a) and (b): Nameplates
- English -
CFW700 model
Manufacturing date
Serial number
Maximum ambient
temperature (without
derating) for ND overload
with open spaces for
ventilation around the
inverter (refer to the
dimensions A, B, C and D
in figure B.8)
Output rated data
(voltage, number of
phases, rated currents for
operation with ND and HD
overload cycles, overload
currents for 1 min and 3 s,
and frequency range)