Basic Application Menu - WEG CFW700 Serie Manual Del Usuario

5.2.2 Basic Application Menu

Step
Action/Display Indication
1
Monitoring Mode.
Press the ENTER/MENU key to get into
the first level of the programming mode.
2
The PARAM group is selected, press the
or keys to select the BASIC
group.
3
Press ENTER/MENU when the group
is selected.
4
In this moment the Basic Application
routine is initiated. If necessary, change
"P0100 – Acceleration Time" parameter.
Press the or
parameter.
5
I f n e c e s s a r y, c h a n g e " P 0101 –
Deceleration Time".
Press the or
parameter.
First Time Power-Up and Start-Up
Step
6
If necessary, change "P0133 – Minimum
Speed" parameter.
Press the
parameter.
7
If necessary, change "P0134 – Maximum
Speed" parameter.
Press the
parameter.
8
If necessary, change "P0135 – Max.
Output Current" parameter.
Press the
parameter.
9
If necessary, change "P0136 – Manual
Torque Boost" parameter.
Press the
key to the next parameter.
10
Press the BACK/ESC key to end the
Basic Application routine.
key to the next Press the BACK/ESC again to go back
to the monitoring mode.
Figure 5.2: Basic Application Group
- English -
Action/Display Indication
or key to the next
or key to the next
or key to the next
or key to the next
CFW700 | 49