Oriented Start-Up Menu - WEG CFW700 Serie Manual Del Usuario

First Time Power-Up and Start-Up
Steps:
(1) Set the password for parameter modification.
(2) Execute the Oriented Start-up routine (STARTUP group).
(3) Set the parameters of the Basic Application group (BASIC).

5.2.1 Oriented Start-up Menu

Step Action/Display Indication
1
Monitoring Mode.
Press the ENTER/MENU key to get into
the first level of the programming mode.
2
The PARAM group is selected, press
the or
STARTUP group.
Press ENTER/MENU when the group
3
is selected.
4
The parameter "P0317 – Oriented Start-
up" is then selected, press the ENTER/
MENU to get into the parameter content.
46 | CFW700
Step
5
6
keys to select the
7
8
Figure 5.1: Oriented Start-up
- English -
Action/Display Indication
Change the parameter P0317 to "1 –
Yes", by using the key.
Press ENTER/MENU to save.
In this moment the Oriented Start-up
routine is initiated and the "CONF"
status is indicated at the keypad (HMI).
The parameter "P0000 - Access to
Parameters" is selected. Change
the password to set the remaining
parameters if necessary. The factory
default is 5.
Press the key to the next parameter.
If necessary, change "P0296 – Line
Rated Voltage". This change will affect
P0151, P0153, P0185, P0321, P0322,
P0323 and P0400.
Press the key to the next parameter.