WEG CFW700 Serie Manual Del Usuario página 38

Keypad (HMI) and Basic Programming
P1010 – Version of the Electronic Potentiometer Application (E.P.)
Adjustable 0.00 to 10.00
Range:
Properties: ro
Access groups SPLC
via HMI:
Description:
Read only parameter that presents the software version of the electronic potentiometer
application developed for the SoftPLC function of the CFW700.
P1011 – E.P. Speed Reference
Adjustable 0 to 18000 rpm
Range:
Properties: ro
Access groups SPLC
via HMI:
Description:
Read only parameter that presents, in rpm, the current speed reference value of the electronic
potentiometer application.
P1012 – E.P. Speed Reference Backup
Adjustable 0 = Inactive
Range: 1 = Active
Properties: -
Access groups SPLC
via HMI:
Description:
This parameter sets whether the backup function of the electronic potentiometer speed
reference is active or inactive.
If P1012 = 0 (Inactive), the inverter will not save the value of the speed reference when
disabled. Therefore, when the inverter is enabled again, the speed reference value will be the
minimum speed set in P0133.
38 | CFW700
Factory
Setting:
Factory
Setting:
Factory
Setting:
- English -
-
-
1