WEG CFW700 Serie Manual Del Usuario página 26

Keypad (HMI) and Basic Programming
Motor rotation
Menu (parameters
group selection) –
only one parameter
group is shown at
each time.
Main display
Parameter groups available at the Menu:
PARAM: all parameters;
READ: only the reading parameters;
MODIF: only the parameters changed compared to the factory default;
BASIC: basic application parameters;
MOTOR: parameters related to motor data control;
I/O: parameters related to the digital and analog inputs/outputs;
NET: parameters related to the communication protocol;
HMI: parameters for the keypad configuration;
SPLC: parameters related to the SoftPLC function;
STARTUP: parameters for the oriented startup.
Inverter status:
LOC: local reference;
REM: remote reference;
: motor rotation according to the arrows;
CONF: configuration;
SUB: DC link undervoltage;
RUN: inverter enabled and/or DC braking activated.
26 | CFW700
Inverter
Local/Remote ()
status
Figure 4.2: Display sections
- English -
Secondary display
Variable unit
(shows the value of
the main display)
Variable monitoring
bar graph