Welby TEN 603 Manual Del Usuario página 28

First steps
− Do not mix battery types, brands, rechargeable
with non-rechargeable batteries, or batteries
with different capacities.
− Insert 3 batteries (AAA), observing the correct
polarity (+ and - pole).
Battery types: The TEN 603 TENS/EMS device
uses AAA alkaline batteries.
− Do not use any rechargeable batteries!
1. First remove the belt clip
2. To open the cover fastener, press on the arrow-shaped
hatched surface of the battery compartment covering
and slide outwards to remove it.
3. Remove the empty batteries
4. Insert three new alkaline batteries (AAA).
5. When inserting the batteries, make sure that their polarity
is correct (see marking/stamped information in the battery
compartment).
6. Put the battery compartment covering back on and slide
it in the direction of the belt clip holster until it locks back
into place.
28
in the direction of the arrow.
2
.
3
28