Adhesive Electrodes; Instructions For Applying The Adhesive Electrodes - Welby TEN 603 Manual Del Usuario

Adhesive electrodes

(Min. = minutes, Hz = cycles per second (Hertz), µs = pulse
length in microseconds)
The preinstalled programs each have a duration of max.
40 minutes. The corresponding waveforms, frequencies and
pulse times for the programs are found in the program over-
view shown above.
Adhesive electrodes
Instructions for applying the adhesive
electrodes
The following examples illustrate standard positions for the
application of the adhesive electrodes. As every user responds
differently to electrical nerve stimulation, for a successful
pain treatment or stimulation to the muscle groups, it is very
important that the adhesive electrodes are placed correctly in
consultation with your physician.
Direction of electrical current
− Apply the adhesive electrodes
the left and right of) the pain area.
− Do not apply the electrodes directly on the center of pain!
It is important that the stimulation current is able to flow
through the pain area.
44
Protective film for adhesive electrodes
Signal form:
The signal form is bipolar pulse
above and below (or to
4
Red plug
Black plug