Tens 28-30 And Ems 8-10 - Welby TEN 603 Manual Del Usuario

Application
Procedure for fixed programs TENS 28–30
and EMS 8–10
TENS 28–30 and EMS 8–10 are preset programs for which you
can individually adjust the frequency, pulse width and treat-
ment time.
1. Place the electrodes
enclose the pain area, and switch
on the device. Select an individual
TENS/EMS program (Fig. 8, example
TENS program 28) as described in
steps 1–4 of the previous chapter.
2. Hold the
approx. 2 seconds to activate the
setting mode.
3. Set the frequency:
The frequency can only be adjusted
for programs TENS 28 and TENS 30.
Press the intensity buttons
to set a desired frequency between
1 Hz and 150 Hz (Fig. 9, example pro-
gram TENS 28).
Confirm your selection with the
button and you can then adjust
the pulse width (except for in
program 29).
34
so that they
4
button down for
7
/
8 13
Fig. 8
Fig. 9