Preferred Program - Welby TEN 603 Manual Del Usuario

Application
2. Press the
(see Fig. 12, example TENS program).
3. Press the
program Pb1 (see Fig. 12, example
TENS program Pb1).
Important: Repeatedly pressing the
button will take you to programs
Pb2 and Pb3.
4. Begin treatment, following steps 5 through 7 in the chap-
ter "Procedure for fixed programs TENS 1–27, EMS 1–7 and
Massage 1–10".
Important:
Frequency, pulse width and treatment time can only be set
in the relevant Pb3 programs when steps 3 to 6 in the pre-
vious chapter are

Preferred Program

The Preferred Program is a special setting with which you can
easily call up a program that has been personalized specifically
for you. Your program settings are loaded and activated im-
mediately after the device is switched on. Settings for this indi-
vidual program can be made according to recommendations
from your physical therapist or physician, for example.
Setting your preferred program
1. Select your program and the corresponding settings as
described in the previous chapters.
At the start of stimulation treatment, the output intensity
for both channels CH1 and CH2 is always set by default at 0.
36
button to set TENS or EMS mode
14
button to select the
12
followed.
Fig. 12