Publicidad
Operation
Spout
Bec
Boquilla
Operation
4. Remove the water bottle and fill it with water. The duck bill valve is easily removable for filling.
Be sure you have reinserted the valve before placing the bottle upside down in the bottle
support.
Figure 5
Figura 5
Once you have loaded the tape and prepared the moistening system, the Electra is ready for
operation; however, if you are using heavy or light weight tape you may need to make adjustments
to the water level or to the pressure pad position. Information about these adjustments begins below.
For standard operation, to cut any length of tape:
1. Turn the main switch ON.
2. Press the key pad for the desired tape length.
Water Bottle
Bouteille d'eau
Botella de agua
Water Regulator
Régulateur d'eau
Regulador de agua
13
Publicidad
