INTRODUCTION
The purpose of this manual is to provide the
owner and operator with effective and safe
instructions for the use and maintenance
of the wheel balancer.
Follow all of the instructions carefully and
your machine will assist you in your work
and give long-lasting and efficient service,
in keeping with manufacturer traditions.
The following paragraphs define the levels
of danger regarding the machine, associ-
ated with the warning captions found in
this manual.
DANGER
Immediate danger, causing serious injury
or death.
WARNING
Danger or unsafe procedures that could
cause serious injury or death.
WARNING
Danger or unsafe procedures that could
cause minor injury or material damage.
Read these instructions carefully before
powering up the machine. Keep this man-
ual and all illustrative material supplied
with the machine in a folder near the tyre
changer, where it is readily accessible for
consultation by the machine operator.
The technical documentation supplied
is considered an integral part of the ma-
chine, and must always accompany the
equipment if it is sold or transferred to a
new owner.
The manual is only to be considered valid
for the machine of the model and serial
number indicated on the nameplate ap-
plied to it.
WARNING
Adhere to the contents of this manual:
The producer declines all liability in the
case of actions not specifically described
and authorised in this manual.
44
NOTE
Some of the illustrations contained in this
manual were derived from photos of proto-
types: the standard production machines
may differ in some details.
These instructions are for the attention of
personnel with basic mechanical skills. We
have therefore condensed the descriptions
of each operation by omitting detailed
instructions regarding, for example, how
to loosen or tighten the fixing devices on
the machine. Do not attempt to perform
operations unless properly qualified and
with suitable experience. If in need of
assistance, call an authorised assistance
centre.
User manual ProLine 650