Compressed Air Hook-Up; Safety Regulations - Corghi ProLine 650 Manual De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 161
COMPRESSED AIR
HOOK-UP
WARNING
The compressed air hook-up may only
be performed if the pneumatic ring nut
is supplied (optional accessory supplied
on request).
WARNING
All compressed air hook-ups must be
carried out by qualified personnel only.
- The hook-up to the workshop com-
pressed air system must ensure a mini-
mum pressure of 8 bar.
- A universal union is used for connection
to the compressed air system. No special
or additional adaptor is needed for con-
nection. A pressure-resistant hose with
6mm inner diameter and 14mm outer
diameter must be fastened to the notched
union using the clamp provided with the
machine.
SAFETY
REGULATIONS
WARNING
Failure to comply with the instructions
and danger warnings can cause serious
injuries to the operator or other persons.
Do not operate the machine until you
have read and understood all the danger/
warning notices in this manual.
In order to operate the machine correctly,
it is necessary to be a qualified and au-
thorised operator, able to be trained and
to know the safety regulations. Operators
are expressly forbidden from using the
machine under the influence of alcohol
or drugs capable of affecting physical and
mental capacity.
50
The following conditions are essential:
- read and understand the information and
instructions described in this manual;
- have a thorough knowledge of the fea-
tures and characteristics of the machine;
- keep unauthorised persons well clear of
the working area;
- make sure that the machine has been
installed in compliance with all relevant
standards and regulations in force;
- make sure that all machine operators are
suitably trained, that they are capable of
using the machine correctly and safely
and that they are adequately supervised
during work;
- do not touch power lines or the inside of
electric motors or other electrical equip-
ment before making sure that they have
been powered off;
- read this booklet carefully and learn how
to use the machine correctly and safely;
- always keep this user manual in a place
where it can be readily consulted and do
not fail to refer to it.
WARNING
Do not remove or deface the DANGER,
WARNING, CAUTION or INSTRUCTION
decals. Replace any missing or illeg-
ible decals. If one or more decals have
been detached or damaged, they can be
replaced by your nearest manufacturer
dealer.
- When using and carrying out maintenance
on the machine, observe the unified in-
dustrial accident prevention regulations
for high voltage industrial equipment and
rotating machinery.
- Any unauthorised alterations made to
the machine automatically release the
manufacturer from any liability in the case
of damage or accidents attributable to
such alterations. Specifically, tampering
with or removal of the machine safety
devices is a breach of the regulations
relating to Safety at Work.
User manual ProLine 650

Publicidad

Tabla de contenido
loading

Tabla de contenido