Wilo Stratos GIGA Serie Instrucciones De Instalación Y Funcionamiento página 41

8.6.3 Navigation
±
1.0.0.0
±
2.0.0.0
4.0.0.0 4.1.0.0
4.2.0.0
5.0.0.0
4.4.0.0
Fig. 37: Navigation example
8.6.4 Changing selection/settings
±
5.6.3.0
12.3
Fig. 38: Setting with return to the "Selec-
tion/settings" menu element
Installation and operating instructions Wilo-Stratos GIGA
2 s
• Change to menu mode (see 8.6.2 "Changing to menu mode" on
page 34).
Carry out general menu navigation as follows (for an example, see
Fig. 37):
During navigation, the menu number flashes.
• To select the menu element, turn the red button.
The menu number is incremented up or down. The symbol associated
with the menu element and the setpoint or actual value are shown, if
applicable.
• If the downward pointing arrow for "One level down" is shown, press
the red button to change to the next level down. On the display, the
new menu level is indicated by the menu number, for example,
4.4.1.0
<4.4.0.0> changes to <4.4.1.0>.
The symbol for the menu element and/or the current value (setpoint,
actual value or selection) will be shown.
4.4.3.0
• To return to the next higher menu level, select the "One level up"
menu element and press the red button.
On the display, the new menu level is indicated by the menu number,
for example, <4.4.1.0> changes to <4.4.0.0>.
NOTE:
If the red button is pressed for two seconds while a "One level up"
menu element is selected, the display jumps back to the status page.
To change a setpoint or a setting, generally proceed as follows (for an
example, see Fig. 38):
• Navigate to the desired "Selection/settings" menu element.
The current value or state of the setting and the associated symbol
5.6.3.0
are displayed.
300
• Press the red button. The symbol representing the setpoint or the
S
setting flashes.
• Turn the red button until the desired setpoint or setting is displayed.
5.6.3.0
For an explanation of the settings represented by the symbols, see
10
the table in chapter 8.7 "Menu elements reference" on page 37.
S
• Press the red button again.
The selected setpoint or setting is confirmed, and the value or symbol
stops flashing. The display has returned to menu mode with the menu
number unchanged. The menu number flashes.
English
35