Display Name - Franklin Electric SUBMONITOR CONNECT Manual De Instalación Y Funcionamiento Del Propietario

MAINTENANCE
Troubleshooting
Fault History > Fault Event #1 - #150
Mod
RW RC

Display Name

bus
203 R Y Fault
204 R N Alarm 1
205 R N Alarm 2
206 R N Alarm 3
207 R N Alarm 4
208 R N Alarm 5
50
Range
0 - None
1 - Locked Rotor
2 - Stall
3 - Overload
4 - Over Current
5 - No Current
6 - Unexpected Current
7 - Current Loss
8 - Current Unbalance
9 - Ground Fault
10 - Out of Calibration
11 - Max Start Time
12 - Over Voltage
13 - Under Voltage
14 - Voltage Loss
15 - Low Voltage
16 - Voltage Unbalance
17 - Phase Order
18 - Over Power
19 - Under Power
20 - Negative Power
21 - False Start
22 - Insulation Check
23 - SubTemp
24 - Meter Hardware
25 - Meter Firmware
26 - Meter EEPROM
27 - Invalid Calibration
33 - Cycle Fault
34 - RTD Over Temperature
35 - Reserved
36 - Reserved
37 - RS-485 Comm Loss
38 - Reserved
39 - Reserved
40 - Reserved
41 - Pilot Device
42 - Processor Fault
43 - I/O EEPROM
44 - Button Jam
50 - Reserved
51 - Reserved
52 - Reserved
53 - Reserved
59 - Meter Comm Loss
60 - Display Comm Loss
61 - Reserved
62 - Bluetooth Module Fault
68 - Undefined Fault
Description
Currently tripped fault
Currently active alarm #1
Currently active alarm #2
Currently active alarm #3
Currently active alarm #4
Currently active alarm #5
In the Fault History List, Fault Event #1 is the most recent fault
and Fault Event #150 is the oldest recorded fault.
Use the Up and Down buttons to navigate through the recorded
faults.
The list shown here are all the possible faults that can be
displayed. There are some reserved fault codes that are not
used:
28 - Reserved 1
29 - Reserved 2
30 - Reserved 3
31 - Reserved 4
32 - Reserved 5
45 - Reserved 6
46 - Reserved 7
47 - Reserved 8
48 - Reserved 9
49 - Reserved 10
54 - Reserved 11
55 - Reserved 12
56 - Reserved 13
57 - Reserved 14
58 - Reserved 15
63 - Reserved 16
64 - Reserved 17
65 - Reserved 18
66 - Reserved 19
67 - Reserved 20