Component Identification - Franklin Electric SUBMONITOR CONNECT Manual De Instalación Y Funcionamiento Del Propietario

Component Identification

This image shows all possible connectors available.
NOTE: The connectors shown above are model-dependent. Your device might not have all the connectors
shown here.
1. Voltage Input
2. Control Circuit (TRIAC Switch) to Contactor (Models MT1111, MT6111, MT1311 only)
3. RS-485 Modbus Communication
4. Relay Outputs
5. PT100/PT1000 Connector
6. Voltage Inputs (Models MT1311 and MT2211 only)
7. Dry Inputs (Models MT1311 and MT2211 only)
8. Pilot Device Inputs (Models MT1311 and MT2211 only)
9. Motor Insulation Check Output
10. Integrated Current Transformers
11. Contactor Power Output (Model MT2211 only)
PRODUCT INFORMATION
Component Identification
7