Fuse Replacement - Tyco Healthcare AutoSonix Manual Del Operador

8

Fuse replacement

WARNING: TO AVOID ELECTRIC SHOCK DO NOT REMOVE THE CASE COVER FROM THE GENERATOR OR THE TRANSDUCER. THERE ARE
NO USER-SERVICEABLE PARTS INSIDE ANY OF THESE COMPONENTS.
Figure 5: Fuse Replacement
A) SNAP CONNECTOR
B) FUSE HOLDER
C) FUSES
FUSE REPLACEMENT NOTES:
1. Turn off and remove power cord from both wall outlet and the generator.
2. Use a small screwdriver or thumb nail to remove the fuse holder below the power cord connector by releasing the spring loaded snap
clips.
3. Pull out fuse holder.
4. Remove and replace with new fuses of the same type. There is no required orientation of the fuses. Be sure to replace both fuses.
5. Reinsert the fuse holder by pressing it into the power connector until it snaps into place.
WARNING: IF AFTER FUSE REPLACEMENT THE FUSE FAILS WHEN THE GENERATOR IS REACTIVATED, DISCONTINUE USE OF THE
DEVICE AND CONTACT UNITED STATES SURGICAL.
21