Specifications - Rotel RAP-1580MKII Manual De Instrucciones

30

Specifications

Audio
Continuous Power Output
1k Hz, THD < 0.05%, 4 ohms
1k Hz, THD < 0.05%, 4 ohms
1k Hz, THD < 0.05%, 8 ohms
20 - 20k Hz, THD < 0.05%, 8 ohms
Total Harmonic Distortion
Intermodulation Distortion (60 Hz : 7 kHz, 4:1)
Frequency Response
Phono Input
Analog Bypass
Digital Input
Damping Factor (1k Hz, 8 ohms)
Signal to Noise Ratio (A-weighted)
Analog Bypass
Digital Input
Input Sensitivity/Impedance
Phono Level
Line Level
Balance Level
Preamp Output Level
Digital Audio
Video
Input Resolutions
Output Resolution
Color Space Support
Deep Color Support
HDMI Inputs/Outputs
General
Power Consumption
Power Requirements (AC)
BTU (4 ohms. 1/8 Power)
Dimension (W x H x D)
Front Panel Height
Weight
All specifications are accurate at the time of printing. Rotel reserves the right to make
improvements without notice.
Rotel and the Rotel Hifi logo are registered trademarks of The Rotel Co., Ltd. Tokyo, Japan.
200 watts / channel
(2 channels driven)
140 watts / channel
(7 channels driven)
135 watts / channel
(2 channels driven)
100 watts / channel
(7 channels driven)
< 0.05%
< 0.05%
20 Hz - 20k Hz, ± 1 dB
10 Hz - 100k Hz, ± 1 dB
20 Hz - 20k Hz, ± 0.5 dB
230
100 dB
96 dB
3.85 mV / 47k ohms
300 mV / 100k ohms
600 mV / 100k ohms
1.2 V
LPCM (up to 192kHz, 24-bit)
Dolby ® Surround,
Dolby ® TrueHD,
Dolby ® ATMOS,
DTS-HD Master Audio,
DTS X
Dirac Live LE
480i/576i, 480p/576p, 720p,
1080i, 1080p, 1080p 24Hz,
3D, 4K, UHD
480i/576i, 480p/576p, 720p
1080i, 1080p, 1080p 24Hz,
3D, 4K, UHD
sRGB, YCbCr 4:2:2, YCbCr 4:4:4
24-bit, 30-bit, 36-bit
8 inputs with 3 supporting HDCP 2.2
2 outputs supporting HDCP 2.2
Audio Return Channel
1100 watts
< 0.5 watt (standby)
120 volts, 60Hz
230 volts, 50Hz
2800 BTU/h
431 x 192 x 470 mm
17 x 7 5 / x 18 1 / in
9 2
4U / 177 mm / 7 in
22.8 kg / 50.27 lbs
RAP-1580MKII Surround Amplified Processor
"
Made for iPod," and "Made for iPhone," means that an electronic accessory
has been designed to connect specifically to iPod or iPhone, respectively, and
has been certified by the developer to meet Apple performance standards. Apple
is not responsible for the operation of this device or its compliance with safety
and regulatory standards. Please note that the use of this accessory with iPod,
or iPhone may affect wireless performance.
iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple
Inc., registered in the U.S. and other countries.