Getting To Know The Machine - Stiga SBC 627 K Manual De Instrucciones

IMPORTANT - READ CAREFULLY BEFORE USING THE MACHINE.
EN
Keep for future reference
TABLE OF CONTENTS
Getting to know the machine ......................... 1
Safety regulations .......................................... 2
Operating instructions .................................... 4
1. Machine assembly ................................... 4
2. Preparing to work ..................................... 6
3. Using the machine ................................... 7
4. Operating modes and work techniques ..... 9
5. Routine maintenance ............................. 11
6. Extraordinary maintenance ................... 12
7. Diagnostics ............................................ 13
HOW TO READ THE MANUAL
Certain paragraphs in the manual contain par-
ticularly significant information and are marked
with various levels of highlighting with the follow-
ing meaning:
NOTE or
IMPORTANT These give details or further infor-
mation on what has already been said, and aim
to prevent damage to the machine or cause other
damage.
WARNING! Non-observance will result in
the risk of injury to oneself or others.
DANGER! Non-observance will result in
the risk of serious injury or death to oneself
or others.

GETTING TO KNOW THE MACHINE

NOTE - The images corresponding to the ref-
erences are found on page 2 of this manual.
DESCRIPTION OF THE MACHINE
AND ITS RANGE OF USE
This machine is a garden tool, and precisely a
portable brush cutter/grass edge trimmer with
combustion engine for home use.
The machine is essentially composed of an en-
gine which, employing a transmission shaft en-
closed in a tube and an angle transmission,
drives a cutting device that is configured in vari-
ous ways for carrying out different functions
The operator is able to sustain the machine with
the aid of a harness and can operate the main
controls, always keeping a safe distance from
the cutting device.
Intended use
This machine was designed and manufactured
for:
- cutting grass and non-woody vegetation, us-
ing a nylon line (e.g. around the edges of
lawns, flowerbeds, walls, fences and small
grassy areas to tidy up the cutting done using
a mower).
- cutting tall grass, dry branches, twigs and
woody shrubs of up to 2 cm diameter, with the
aid of metal or plastic blades.
Improper use
Any other use differing from the above men-
tioned ones could be hazardous and harm peo-
ple and/or damage things. Examples of improper
use may include, but are not limited to:
- using the machine for sweeping;
- trimming hedges or other jobs in which the cut-
ting device is not used on ground level;
- pruning trees;
- using the machine with the cutting device
above the operator's belt level;
- use of the machine for cutting non-plant ma-
terial;
- use of the machine by more than one person.
IDENTIFICATION LABEL
AND MACHINE COMPONENTS
1. Sound power level
2. Conformity marking
3. Month / Year of manufacture
4. Type of machine
5. Serial number
6. Name and address of manufacturer
7. Article code
11. Power unit
12. Drive tube
13. Cutting device
a. 3-point blade
b. Cutting line head
14. Cutting device guard
15. Front handgrip
16. Guard
17. Handle bar
18. Rear handgrip
19. Connection point (of the harness)
20. Harness
1