SOPRO COMEG SYMBIOZ Flow Manual De Usuario página 17

5
insTAlling The APPARATUs
Before unscrewing the high-pressure hose:
- Check that the valve on the cylinder is closed, then:
• Lower the pressure inside the system by slowly unscrewing the tubing hose.
OR
• Use the Purge function (on the interface, click PURGE) after closing the valve on the bottle.
Manually disconnect the low-pressure hose from the wall point.
Turn off the apparatuses.
Connect the cable supplied with the camera to the socket on the back side of the camera control
unit, and then to the back side of the insufflator [C5].
Turn on the apparatuses.
5.4 DisCOnneCTing The CO2 CYlinDeR
5.5 DisCOnneCTing FROM The WAll POinT
5.6 COnneCTing TO The sOPRO CAMeRA
- 17 -