SOPRO COMEG SYMBIOZ Flow Manual De Usuario página 24

7
sPeCiAl FeATURes
7.8 TesTing OF MeDiCAl CO2 CYlinDeR PRessURe
This latest generation of insufflators is equipped with a pressure measurement system in the cy-
linder with continuous visibility.
When the pressure in the CO2 cylinder reaches 40 bars, the corresponding logo is displayed
in orange.
When the pressure in the CO2 cylinder reaches 20 bars, the corresponding value is displayed
in orange.
Below a pressure of 10 bars, the insufflator cannot start. The display of the input pressure
value changes to orange.
7.9 TesTing OF MeDiCAl CO2 CenTRAl WAll POinT
This latest generation of insufflators is equipped with a CO2 gas central wall point pressure
measurement system with continuous visibility.
Below a pressure of 2.8 bars, the insufflator cannot start. The display of the flow rate input
value changes to orange.
From 10 bars, the insufflators will change automatically to "cylinder" mode. Only to be used
with a medical CO2 gas central wall point, in compliance with European standards.
7.10 TOUCh sCReen [l1]
For better communication with the user and for easier use, we have equipped our latest genera-
tion of insufflators with a touch screen. This serves to provide the following information:
• warnings and error messages
• indications that the cylinder is empty
• indications of the instantaneous pressure in mm Hg
• indications of the pressure setpoint in mm Hg
• indications of the flow rate in l/min
• indications of the volume of CO2 used in litres
• status indications: on / off and "high flow rate" / "low flow rate"
• indications of the operating mode
- 24 -