Information Menu Display - Nilfisk Liberty SC50 Instrucciones De Uso

6/2020

INFORMATION MENU DISPLAY

Menu Display
Pressing the Information Switch (Y) will bring up the menu shown
below which allows the operator to change machine settings and
gather machine information. Use the two Navigation Arrows (Y1) (up
& down) to move through the menu. Use the left Navigation Arrow
(Y2) to exit or go back up a menu level. The information switch is
used to select or save a setting within the menu.
Menu visible with either blue (User) or yellow (Supervisor) SmartKey.
Menu Level
1
Language
English*
Autonomous cleaning
Delete this plan**
Add new Location tag**
Delete current tag #NNN**
Scan Location tag
Online help
QR code displayed. User can scan to
navigate to additional resources online.
GUIDES.NILFISK.COM/SC50
System
MMC F/W
Charger F/W
Charger P/N
Serial Num
CRL Compute
CRL Platform
CRL Safety
CRL Camera
CRL Laser
Impact Log
Log a Problem
CRL Wireless Update
Network Status
IP Address
QR String
MAC Address
Autonomy ID
F/W Checksum***
Update F/W***
*Default setting
**Only visible to blue User key if permission is granted by Supervisor.
***Supervisor and Technician Only
12/2017
2
Menu display language
Deletes the plan the machine is currently on
Adds a new location tag
Deletes the current tag NNN (deletes all plans associated with the current tag)
Forget the current tag and scan for a known tag
GUIDES.NILFISK.COM/SC50
¢ back
Display current firmware revision
Display current charger firmware revision
This is the custom SW part number of Nilfisk charger. Only available in new chargers. Old
chargers will show "Legacy" New charger will show "NDS10002"
Display PCB serial number from factory
Display current autonomy Compute controller firmware
Display current autonomy Platform controller firmware
Display current autonomy Safety controller firmware
Display current 3-D Vision Sensor firmware
Display current 2D Mapping Sensor firmware
Display list of impact events with max value, timestamp and user id (only if enabled)
- single item view will show max values for each axis (x,y,z)
It puts a tag in autonomy log to help find the root cause of the autonomy problem the user
experiences
Go to menu for wireless update of autonomy firmware
Is network up, or down (down includes an error number)
IP Address of machine, shown as 123.456.789.555
QR string scanned in from "Scan QR Code" menu command
MAC address of the autonomy Kit
Autonomy Kit Unique ID
The CRC32 of the running firmware in the MMC
Option to update autonomy and MMC (Main Machine Controller) firmware
INSTRUCTIONS FOR USE
MAIN MENU
Language
Autonomous Cleaning
Online help
System
exit, select
Notes
56091204 - Nilfisk Liberty SC50
ENGLISH - A
Y2 Y1
Y
Y1
A - 15