Nilfisk Liberty SC50 Instrucciones De Uso página 24

A - ENGLISH
LOCATION TAG POSITION - CONTINUED
• SCAN LOCATION TAG
The machine can save multiple Location Tags and each tag can associate to multiple plans. Only one Location Tag is active at a time. To
playback a plan associated to a different tag, machine needs to be told to Scan Location Tag (disassociate the current tag and scan a different
tag). See Figure 2-25. NOTE: Menu options will vary based on key permissions.
1 Drive the machine so the desired location tag is within view of the machine's 3-D vision sensor (1-2 meters in front of location tag).
2 Press Autonomous Help Screen Switch (S) to enter menu.
a. See Figure 2-26. Press up or down arrow to highlight "Scan location tag" to use a different tag and
playback it's saved plans.
b. Press "i" button to "select".
c. Press up arrow to highlight "Yes".
d. Press "i" button to "Save".
e. Display will change and machine will begin actively scanning for a location tag. Moving "0" below
"TAG" indicates machine is actively scanning for a location tag.
f. After tag is scanned, machine will emit a two tone ascending sound and the display will show location tag ID # (xxx). Plans saved to this
location tag can now be played back.
FIGURE 2-25
Tag #001
Tag #003
• DELETE LOCATION TAG
1 Drive the machine so the new location tag is within view of the machine's
3-D vision sensor.
Press Autonomous Help Screen Switch (S) to enter menu.
2
a. See Figure 2-27. Press up or down arrow to highlight "Delete tag #xxx"
to delete.
b. Press "i" button to "select".
A - 24
INSTRUCTIONS FOR USE
Tag #002
Nilfisk Liberty SC50 - 56091204
FIGURE 2-26
NOT ON PLAN
Record new plan (¨)
Scan location tag
Delete tag #227
¢ exit, $ select
FIGURE 2-27
NOT ON PLAN
Record new plan (¨)
Scan location tag
Delete tag #227
¢ exit, $ select
6/2020
S
Tag: 227
Tag: 227
12/2017