Nilfisk Liberty SC50 Instrucciones De Uso página 18

A - ENGLISH
INFORMATION MENU DISPLAY – CONTINUED
Menu visible only with yellow (Supervisor) SmartKey.
Menu Level
1 2
Options
OvrCurProt. Enabled?
Impact Level
Impact Action
Impact Log User ID?
Show Charging Lights?
Date/Time/Timezone
*Default setting
A - 18
INSTRUCTIONS FOR USE
3
No
Yes*
High*
Low
Log Only*
Log & Lock
No*
Yes
Yes*
No
Timezone
Hour
Minute
Second
Year
Month
Day
Nilfisk Liberty SC50 - 56091204
Notes
Supervisor selectable options
Over Current Protection can be disabled for using the machine on certain
rubber flooring where current draw is higher than expected
Impact detection sensitivity level. If nuisance tripping occurs (i.e. driving
over a floor transition), adjust setting to low.
Impact detection status
Log Only – Impact is recorded
Log & Lock – Impact is recorded and User is locked out of scrub functions
(Display shows (X24)) until machine is reset with a Supervisor key.
Whether to record the User ID in the impact log
LED status bar will display a visual indication of the batteries level of
charge while batteries are being charged (see page 51)
Set the date, time and timezone
Choose timezone that matches machine's location
Set current time, hours in 24-hour format
Set current time minutes
Set current time seconds
Set current year
Set current month
Set current day
6/2020
12/2017