Cleaning Solution Filter; Clean Sensor Lenses - Nilfisk Liberty SC50 Instrucciones De Uso

A - ENGLISH

CLEANING SOLUTION FILTER

1 Drive the machine to the appointed disposal area.
2 Ensure that the machine is off and the Magnetic SmartKey (Z) is
removed.
3 See Figure 4-2. Close the Solution Shutoff Valve (34).
Unscrew the solution Filter Cover (33a). There will likely still be
4
some solution in the line that will spill out.
5 Clean the filter cover and Screen (33b).
6 Reinstall the screen and cover, ensure Gasket (33c) is in place.
7 Open the Solution Shutoff Valve (34).

CLEAN SENSOR LENSES

CAUTION!
Do not use any harsh cleaning detergents or abrasive cleaning agents on the sensor lenses or damage may occur.
Only clean the lenses as needed to reduce the opportunity of scratching them.
1 See Figure 4-3.
Clean 3-D Vision Sensor lenses (15) and Infrared source lenses (45A) using an optical grade microfiber cloth dampened with lens
•
cleaning solution.
Clean all Drop-Off Sensor lenses (16) using an optical grade microfiber cloth dampened with lens cleaning solution.
•
• Clean all Safety Sensor lenses (17) using an optical grade microfiber cloth dampened with lens cleaning solution.
• Clean 2D Mapping Sensor lens (14) using an optical grade microfiber cloth dampened with lens cleaning solution.
FIGURE 4-3
15
15
45A
A - 54
INSTRUCTIONS FOR USE
Nilfisk Liberty SC50 - 56091204
34
16
17
17
6/2020
FIGURE 4-2
33c
33b
33a
16
14
12/2017