Replacing The Top Burner Nozzle (Ø 130 - 10 Kw); Replacing The Oven Burner Nozzle; Replacing The Plate Burner Pilot Light Nozzle - Angelo Po 1N1TPGV Manual De Uso

To carry out this operation, proceed as follows.
Turn off the gas supply tap.
1)
Pull off the knob (A).
2)
Undo the screws (C) nd remove the control
3)
panel (B).
Unscrew the nozzle (D) and replace it with
4)
the one suitable for the type of gas in use
(see table at back of manual).
Replace the control panel (B)and the knob
5)
(A) on completion of the operation.
To carry out this operation, proceed as follows.
Turn off the gas supply tap.
1)
Undo the screws (B) and remove the control
2)
panel (A).
Unscrew the nozzle (C) and replace it with
3)
the one suitable for the type of gas in use
(see table at back of manual).
Replace the control panel (A) on completion
4)
of the operation.
GB
To carry out this operation, proceed as follows.
Turn off the gas supply tap.
1)
Pull off the knob (A).
2)
Undo the screws (C) and remove the control
3)
panel (B).
Unscrew the union (D).
4)
Remove the nozzle (E) and replace it with the
5)
one suitable for the type of gas in use (see
table at back of manual).
Retighten the union (D).
6)
Replace the control panel (B) and the knob
7)
(A) on completion of the operation.
3320110_inst_GB_rev.1
REPLACING THE TOP BURNER NOZZLE (Ø 130 - 10 KW)

REPLACING THE OVEN BURNER NOZZLE

REPLACING THE PLATE BURNER PILOT LIGHT NOZZLE

A
B
A
A
B
- 18 -
D
C
8
C
B
C
C
C
E
D
ENGLISH