Gas Connection; Connection Of Fume Exhaust Vent - Angelo Po 1N1TPGV Manual De Uso

Important
Those authorised to carry out this operation
must have experience acquired and certifi ed
in the specifi c sector, must make the connec-
tion to the proper standards, and must com-
ply with all the relevant regulations and legi-
slation.
Once the connection has been made, before
the appliance is put into operation a general
check must be made to ensure there are no
gas leaks.
To make the connection, connect the mains
line to the appliance's connection pipe, fi tting a
shut-off tap (A) to allow the gas supply to be cut
off when necessary.
Important
The tap (A), not supplied with the appliance,
must be installed in an easily accessible
position and its status (on or off ) must be
obvious at a glance.
GB
Important
Make the connection in compliance with the
relevant legal requirements, using appro-
priate and recommended materials.
Position the appliance
1)
underneath the hood (A)
(see diagram).
Important
The gas supply tap (A) must
open automatically when
the fan of the extraction sy-
stem is switched on.
3320110_inst_GB_rev.1

GAS CONNECTION

CONNECTION OF FUME EXHAUST VENT

A
- 10 -
A
Important
The gas supply pipe must comply with the
national requirements in force and must be
periodically examined and replaced if neces-
sary.
Connecting to a fan extractor hood
To carry out this operation, proceed as follows.
A
ENGLISH