Tabla De Contenido; Safe Handling - B.Braun Aesculap GN200 Instrucciones De Manejo

Contents
1. Safe handling
1.1 Safe for use in conformance with IEC regulations
2. Product description
2.1 Scope of supply
2.2 Components required for operation
2.3 Intended use
2.4 Operating principle
2.5 Acoustic warning signal
2.6 Monitoring functions
2.7 Output power diagrams
2.8 Maximum peak output voltage (Up)
3. Preparation and setup
3.1 First use
4. Working with the Lektrafuse HF Generator GN200
4.1 System set-up
4.2 Function checks
4.3 Safe operation
5. Validated reprocessing procedure
5.1 General safety instructions
5.2 General information
5.3 Preparations at the place of use
5.4 Preparation before cleaning
5.5 Cleaning/disinfection
5.6 Wipe disinfection for electrical devices without sterilization
5.7 Inspection, maintenance and checks
5.8 Storage and transport
6. Maintenance
6.1 Safety inspection
7. Troubleshooting list
7.1 Regrasp error
7.2 Warnings
7.3 Error reports
7.4 Failure messages
7.5 Problem solving
7.6 User maintenance
7.7 Fuse replacement
8. Technical Service
9. Accessories/Spare parts
10. Technical data
10.1 Ambient conditions
11. Disposal
12. Distributor in the US/Contact in Canada for product
information and complaints
1.

Safe handling

3 CAUTION
4 Federal law restricts this device to sale by or on order of a physician!
5
Note
5
The present instructions for use only describe the layout, function and
5
operation of the Lektrafuse HF generator GN200 and are not suitable for
5
instructing a beginner in high-frequency electrosurgery. A general descrip-
5 tion of the application of high-frequency electrosurgery can be found in
the respective O.R. manuals and other relevant literature.
6
These instructions and the device described are intended exclusively for use
6
by qualified medical specialists who have been trained in the specific tech-
7
nique and the surgical procedures to be carried out.
7
7
Risk of injury to patients due to inappropriate
7
application!
8
►
DANGER The product and accessories should only be
8
operated by qualified or trained and experi-
10
enced personnel.
10
►
Transport the product only in its original box.
10
►
Prior to use, check that the product is in good working order.
10
►
Observe "Notes on Electromagnetic Compatibility (EMC)", see
11
TA022130.
11
►
The Lektrafuse HF generator GN200 fulfills the requirements of
11
CISPR 11, Class A.
11
►
To prevent damage caused by improper setup or operation, and in order
12
not to compromise warranty and manufacturer liability:
12
- Use the product only according to these instructions for use.
12
- Follow the safety and maintenance instructions.
12
- Only combine Aesculap products with each other.
12
- Adhere to application instructions according to relevant norms, see
14
Safe for use in conformance with IEC regulations.
14 ►
Inspect the accessories regularly: Electrode cables and endoscopic
accessories, in particular, must be checked for possible damage to the
15
insulation.
15
►
Keep the instructions for use accessible for the user.
16
►
Always adhere to applicable standards.
16
17
17
17
18
18
19
19
19
3