Publicidad
Idiomas disponibles
Idiomas disponibles
Headers:
A RAMJET 502 engine should be equipped with a header exhaust system for maximum performance in applications where a
nonproduction exhaust system is legal. All of the calibration development and validation testing was done with a header exhaust
system installed on our development engines. Installing production style exhaust manifold may increase back pressure and alter the
performance of the system. The recommended header configuration is 2" diameter primary pipes, 36 inches long, with 3 1/2" diameter
collectors. Use 3" diameter tailpipes with a balance tube ("H" pipe) and low restriction mufflers.
Rocker Covers:
The RAMJET 502 engine comes equipped with die cast rocker covers, part number 12495488. This package includes two covers,
14 bolts, two grommets, and an oil fill hole cap. Chrome Chevrolet Bow Tie rocker covers are available in a short configuration part
number 12342093. Chevrolet performance also offers two different cast aluminum rocker covers, part number 12371244 or 25534323.
12371244 has an as cast, light gray color, while 25534323 is a black, powder coated version of the same cover. When using either
the cast aluminum or the tall, chrome rocker covers, ensure that enough clearance exists between the rocker arm cover and the brake
booster.
Diagnostic and Service Tools:
Included with the RAMJET system is a diagnostic trouble code tool. This simple device will allow you to read any diagnostic trouble
codes stored in the ECM. If you would like more functionality than the DTC tool can provide, you can purchase a TechMate scan tool.
Functionally, this scan tool is similar to a Tech 1 or Tech 1A used at Chevrolet dealerships. It provides real-time sensor information,
diagnostic trouble codes, and general system information. To purchase a TechMate scan tool, simply call or write to:
Rinda Technologies Inc.
4563 N. Elston Avenue
Chicago, IL 60630
(773) 736-6633
88962910
14
54
Ramjet 502 Engine
IR 17FE14
TITLE
PART NO.
SHEET
OF
Publicidad
