Buttons And Light Indicators On The Control Unit; Indicator Lights / Alarms - Hill-Rom Primo P02033 Manual De Usuario

PROPRIETARY AND CONFIDENTIAL DRAFT: octobre 11, 2012

Buttons and light indicators on the control unit

The control unit is very easy to use and, thanks to the automatic pressure
regulation, no manual adjustments are necessary
Buttons
1 - Alarm silence button :
Inhibits the audible alarms (see "Alarm silence" page 21).
2 - On/Off Button .
NOTE:
To switch off the control unit:
Press to silence the battery, in this case no mains power fault alarm will be
reported ;
Unplug the control unit from the mains.
3 - Maximum inflation button :
Increases the pressure inside the mattress to the maximum value for 5
minutes. See "Maximum inflation" page 19.
Is also used to inflate the seat cushion (see "Seat cushion" page 33).

Indicator lights / alarms

A - Malfunction alarm :
In case of malfunction, the audible alarm sounds and the visual alarm
yellow comes on (see "Malfunction" page 21).
B - Mains power fault alarm :
In case of power failure, the audible alarm sounds and the visual alarm
yellow comes on (see "Mains power fault" page 21).
C - On/Off Indicator:
The green indicator light at the bottom comes on when the control unit is on.
D - Inflation Indicator :
The green indicator light flashes for 5 minutes while the inflation.
170924(2) - EN - Primo
1
A B
User manual
™
2 3
C D
Page 11