Accessories And Spare Parts; Seat Cushion; Installation - Hill-Rom Primo P02033 Manual De Usuario

PROPRIETARY AND CONFIDENTIAL DRAFT: octobre 11, 2012

Seat cushion

The optional seat cushion is an accessory that can be inflated using the control
unit of the Primo
™

Installation

D
A
1. Place the seat cushion at the foot of the bed.
2. Open the Velcro® straps (A) on the seat cushion, disconnect and stretch
the spiral hose (B).
3. Connect the cushion's spiral hose to the control unit.
The hose clicks into place.
4. Connect the control unit to the mains.
5. Press the button to inflate the cushion on the control unit.
The cushion inflates.
The inflation indicator light automatically flashes for 5 minutes,
then stops.
6. Once the cushion is firmly inflated, press the cushion connector lock (C)
and disconnect the coupling.
7. Place the seat cushion on the patient's chair and secure using the strap
provided (D).
Patients can now sit on the cushion, which makes a whistling sound. The cushion
is optimally inflated when the whistling stops.
170924(2) - EN - Primo

Accessories and spare parts

mattress.
B
User Manual
™
D
C
Page 33