Machine Demolition - La Pavoni Bar T Instrucciones De Funcionamiento

To prevent the build-up of deposits from saturating the resins, limi-
ting their functions, they need to be regenerated at regular intervals
according to the following criteria:
- 8 litre softener for 40° French degree hardness water
• up to 400 cups of coffee/day, every 10 days
• up to 800 cups of coffee/day, every 5 days
• up to 1000 cups of coffee/day, every 3 days
- 12 litre softener, for 40° French degree hardness water
• up to 500 cups of coffee/day, every 15 days
• up to 1000 cups of coffee/day, every 7 days
• up to 1500 cups of coffee/day, every 5 days
• up to 2000 cups of coffee/day, every 3 days.
To postpone the regeneration it means that it will
pre-judice the thermal and mechanical functions of
the machine and the taste of the coffee, due to the
formation of scale.
For regeneration, proceed as follows:
place an empty container, having a capacity of at least two litres,
under the pipe (e), turn the (c) and (d) handles to the right, unscrew
the (g) lid and wait for the water to fully flow out of the pipe (e).
Introduce 1.5 Kg. of cooking salt for the 8 litre model or 2 Kg. of
salt for the 12 litre model, place the lid back in place and move
the (c) handle from right to left; let the salted water flow out of the
(f) pipe and wait until the water has become fresh again (the cycle
takes approximately 90 minutes).
g
c
e
a
d
f
b
a. - Water inlet.
b. - Water outlet.
c. - Inlet tap.
d. - Outlet tap.
e. - Vacuum pipe.
f. - Regeneration pipe.
g. - Lid knob.
Now move the (d) handle from right to left.
During regeneration, do not use the machine; for machines equip-
ped with automatic level indicator it is advisable to cut off the pump
power supply, to prevent no-load operation.
Before connecting the softener to the machine, wash the resins,
by establishing a connection to the main water supply and let the
water run for five minutes.
N.B. The above mentioned directions refer to the softener shown in
the pictures; if the equipment differs, follow the directions attached
to the softener itself.
16 – MACHINE DEMOLITION
If you decide not to use the machine, anymore for usury or other
reasons, we recommend to deactivate it by cutting off the power
supply cable, after having removed the plug from the socket.
Regarding the demolition process, we recommend to separate the
various parts of the machine, depending on their nature (plastic,
metal, etc.). Give the disposal of the various parts of the machine
to specialised firms.
34