Festo DGE-25-ZR-RF Instrucciones De Utilizacion página 31

DGE−...−ZR−RF
4 Conditions of use
Please note
Incorrect handling can lead to malfunctioning.
These general conditions for the correct and safe use of the product must be
observed at all times.
Compare the maximum values specified
S
with those of your application.
The maximum permitted values, e.g. for
pressures, forces, torques, masses,
speeds and temperatures must not be
exceeded.
Please observe the prevailing ambient
S
conditions.
Corrosive environments (e.g. ozone) reduce the service life of the axis.
When the unit is fitted in a vertical position:
Warning
If there is a power failure, the work mass will slide down.
Moving loads can cause injury to people or damage to property.
S Make sure that the product is driven only by motors with an integrated
spring−loaded holding brake.
In this way you can prevent the work mass from sliding down (but not in the
event of a toothed belt fracture).
Please comply with national and local safety laws and regulations.
S
Remove all packaging.
S
The packaging is intended for recycling (except for oiled paper which must be
disposed of ).
Festo DGE−...−ZR−RF 0405a English
Fig. 6
31