Festo DGE-25-ZR-RF Instrucciones De Utilizacion página 32

DGE−...−ZR−RF
Apply power to the drive motor, at first
S
limited to low speeds and torques.
In this way you will prevent sudden
uncontrolled movements.
Use the product in its original state. Un
S
authorized modification is not permitted.
Use the product only in conjunction with
S
a separately switched emergency stop
device.
5 Fitting
Fitting the mechanical components
Preparing the product for fitting
Please note
Please note that in the case of heavy loadings the axis must not be fastened
only by the front cover.
Heavy tensile strain may cause the screws in the cover to be pulled out.
Use only the motor−axis combinations specified in Fig. 9.
S
You will then be operating two devices which are especially matched to each
other.
32
2000
1000
0
Fig. 7
Fig. 8
Festo DGE−...−ZR−RF 0405a English
3000
V
min