Roland MC-80 Manual Del Usuario página 138

Apéndices
{Status = Velocity}
Range Lower
Range Upper
Channel
[F2 (SHIFT #)]
Source
Destination
Status
STEP REC
STEP REC STANDBY (SONG)
Parámetros
Meas
Beat
Clock
Channel
Note Number
Velocity
Gate Time
Step Time
Gate Ratio
Velocity
STEP REC STANDBY (PTN)
Parámetros
Meas
Beat
Clock
Pattern
Pattern Name
Beat
Length
MICRO
MICROSCOPE EDIT
CREATE
Create Event
MICROSCOPE EDIT
MOVE
Meas
Beat
138
0 - 127 1 - 128
0 - 127 1 - 128
0 - 16 ALL, 1 - 16
0 - 127 0 - 127
0 - 127 0 - 127
0 - 3 Note, CC, All Oct.
[SEQUENCER], [SHIFT] - [REC], F6 [STEP]
Gama Descripción
1 - 9999 1 - 9999,
01 - 32 01 - 32
000 - 480 000 - 480
0 - 15 1 - 16
0 - 127 C-1 - G9
0 - 127
1 - 960 1 - 960
0 - 8 1/64, 1/32, 1/24,
1/16, 1/12, 1/ 8,
1/ 6, 1/ 4, 1/ 2
1 - 100 1% - 100%
0 - 127 REAL, 1 - 127
[SEQUENCER] - [PATTERN], [SHIFT] - [REC], F6 [STEP]
Gama Descripción
1 - 9999 1 - 9999,
01 - 32 01 - 32
000 - 480 000 - 480
1 - 100 PTN001 - PTN100
ASCII x 10
1 - 32 Numer.: 1 - 32,
2, 4, 8, 16 Denom.: 2, 4, 8, 16
1 - 9998 1 - 9998
[SEQUENCER] - [F4 (MICRO) ] - [F1 (CREATE) ]
[SEQUENCER] - [PATTERN] - [F4 (MICRO) ] - [F1 (CREATE) ]
0 -10 Note/Poly Aftertouch
Control Change/Program Change
Channel Aft/Pitch Bend/
Tune Request/SysEx/
SysEx(GM ON)/SysEx(GM OFF)/
SysEx(GS Reset), Pattern Call
[SEQUENCER] - [F4 (MICRO) ] - [F3 (MOVE) ]
[SEQUENCER] - [PATTERN] - [F4 (MICRO) ] - [F3 (MOVE) ]
1 - 9999 1 - 9999,
01 - 32 01 - 32
1 TEMP
128 TEMP
ALL TEMP
0 TEMP
0 TEMP
TEMP
Predefinido Categ.
1 TEMP
01 TEMP
000 TEMP
--- TEMP
--- TEMP
0 - 127 --- TEMP
--- TEMP
1/ 4 TEMP
0.8 TEMP
REAL TEMP
Predefinido Categ.
1 TEMP
01 TEMP
000 TEMP
PTN001 TEMP
--- SONG
4/4 SONG
0 SONG
--- TEMP
1 TEMP
01 TEMP