Publicidad
Idiomas disponibles
Idiomas disponibles
12
• Fasten stand to pipe with label
facing desired direction of box
opening. Do not pinch heating
cable.
• Loop and tape extra heating
cable to pipe.
13
• Screw box onto stand until it stops. Do not overtighten.
15
• Insert cable tie through slots on stand and box, and
tighten firmly to prevent box rotation.
THERMAL MANAGEMENT SOLUTIONS
1 in (25 mm)
Pipe strap
Trim
EN-RaychemJBS100A100A6-IM-H56046.pdf 03/13
Note: For 1 in (25 mm)
and smaller pipes use
adapter (purchased
separately) and install
between stand and pipe.
JBS-SPA
adapter for
small pipes
Glass cloth tape
(Optional) To change direction of box opening:
14
• Loosen locknut using adjustable pliers.
• Lift box and rotate. Make sure tab on threaded piece fits
into one of the four notches in box.
• Tighten locknut.
Notch
Position
adapter
this side
up.
6 / 8
Publicidad
