Filling with inhalation solution
4.2 Performing the inhalation
WARNING: Danger to health if connection tubings
are mixed up
Check carefully to ensure that the other end of the con-
nection tubing connected to the compressor is attached
to the nebuliser.
If multiple tube systems are used at the same time for dif-
ferent applications (e.g., infusion and inhalation), there is
a risk that the wrong tube systems may be used by mis-
take, which in extreme cases may result in death.
50
Insert the nebuliser in the holder on
the compressor intended for this
purpose.
Pour the quantity of inhalation solu-
tion prescribed by your doctor or the
manufacturer into the top of the
nebuliser. Make sure that the liquid
added does not pass the top scale
graduation mark (max. fill quantity
8 ml). Overfilling can greatly impair
the nebulisation of medication.
The nebuliser is ready for use.