Cleaning With Warm Drinking Water - INQUA Vernebler BR021200 Manual De Instrucciones

5.3 Cleaning with warm drinking water


Use a small, clean brush to remove heavy soiling. For
hygiene reasons, this brush must be used exclusively for
cleaning the nebuliser.

Then rinse all parts thoroughly (for a least 1 minute) under
warm running water (approx. 40 °C without dishwashing
liquid) to remove all remaining dishwashing liquid.

Pour out the water that has collected in the individual parts.
You can remove excess water more quickly by shaking the
parts.
58

Place the components in warm
drinking water with a little dishwash-
ing liquid with no skin protecting or
disinfecting additives (dosage
according to the manufacturer's rec-
ommendations) for about 5 minutes,
until the residues of the inhalation
solution and other contaminants are
removed.